A chainsaw provides the cleanest cut when it comes to thicker 3-inch limbs. If your pruning work requires a chainsaw, it is recommended that you contact a certified arborist. A pole pruner allows you to cut branches that are out of reach. Most pole clippers cut branches up to 2 inches in diameter.
Also called manual clippers, the pruning shears are perfect for cutting small twigs, up to 1 inch in diameter. With a longer handle and a stronger blade, the loppers can cut branches up to 5 cm thick. Pole clippers extend from 10 to 15 feet to reach dead wood on any tree. Look for a pole pruner with a bypass blade and a pruning saw.
The bypass blade can handle branches about 2 inches thick, while the saw trims slightly larger branches. Also known as manual clippers, pruning shears or clippers, these glorified shears cut branches between one and two inches thick. Lou Meyer, arborist at Davey Tree Company in the greater Baltimore area, calls them the most basic starting tool for pruning trees. Pole chainsaws are excellent tools that will greatly simplify the cutting of tree branches.
If you have tall trees that you want to be able to prune, then you'll want to consider buying a pole chainsaw. No one wants to have to use a chainsaw when climbing a ladder if it's not absolutely necessary. When you need to cut tree branches that are high in the air, the reach of a pole chainsaw will make the job much easier than it would otherwise be. Cutting thick branches is one of the most challenging aspects of pruning.
You will need to use the appropriate tree cutting tool for the size of the branch you are looking for to finish the job and avoid any injuries. So what are the best tools for cutting thick branches? Trimmers, pole tree clippers and pole saws are ideal for cutting branches less than 2 inches (5.08 cm) thick. If the branches are 3 inches (7.62 cm) thick or more, it may be better to use a hand saw or chainsaw. You can use various tools to cut thick branches, such as a tree trimmer, a gas pole saw, a chainsaw, a pruner, a pruning shears or a pruning saw.
The tools you choose depend on the thickness level of the thick branches you want to cut. Keep reading as I explain these tools and their uses. Keeping your feet on the ground is a good way to make sure you have the right lever for the job and at the same time stay away from danger by cutting thick branches above your head. A pole tree trimmer is a good option to use in this case.
A pole tree trimmer has a curved head with two blades. The lower blade has to be closed against the upper one to cut the branch you are working on. If you choose to use this tool, you will first need to understand how it works before implementing it. Take your time to overcome the initial learning curve and you'll find that the process is less daunting.
A barbell tree trimmer works best when cutting a branch less than 3 inches (7.62 cm) thick. It takes considerable upper body force to use a pole saw because you have to hold the tool over your head for some time. Choose an option with large, sharp teeth to shorten the holding time of the tool on the head. Gas pole saws are usually powerful for the job, but you can also consider other options, such as cordless pole saws or corded electric pole saws.
If you need to cut a tree branch more than 5 inches (12.7 cm) thick, the chainsaw is the best choice to complete the job quickly. Chainsaws come in different sizes, so you'll have to choose the right size for the job at hand. However, before using a chainsaw to cut thick branches, pay attention to how you plan to get to the branch in relation to the weight of the machine. Even smaller electric options can weigh up to 20 pounds (9 kg), making it difficult to hold them overhead for long periods.
Usually you will need a ladder for branches that you can't climb. You should be aware that gas chainsaws are generally more powerful. Go with them if you want more cutting power. For three branches less than 2 inches (5.08 cm) thick, loppers are a great tool to use.
They are best suited for handling such branches and twigs. If you have a small tree, you can get branch clippers and save money on buying more expensive garden equipment. The loppers are built like standard scissors, but they are much more powerful. They also have sharper blades on the tool head to cut wood with ease.
Manual pruning shears or pruners are tools for even thinner branches or twigs. You can use one of these to cut branches less than an inch (2.54 cm) thick. They are lightweight and easy to use with one hand, making them easy to use when you have to climb. Because of the size of pruning shears, people tend to misjudge the amount of force they can exert.
The pruning shears are powerful enough to cut hard branches up to an inch (2.54 cm) thick. When choosing your pruning shears, you will find options with stainless steel and carbon steel blades. Scissors with stainless steel blades are popular because they can resist corrosion. Pruning saws can cut branches up to 3 inches (7.62 cm) thick, as long as you have the upper body strength needed to get the job done.
They are designed like other saws, but with a slight curve to maintain placement on the branch while cutting it. A pruning saw is easy to use, but can be time-consuming and stressful if you work on a tree branch that is more than 3 inches (7.62 cm) thick. There is also a risk of damaging the saw blade if you use it in a scenario that is not ideal. When buying your pruning saw, you should opt for options that fold into a cover when not in use.
These designs ensure you don't worry about accidents. It also means that you can climb the saw up the ladder if you have to work from the ground. You'll find these poles on smaller chainsaws and pruning saws. They allow you to increase the reach of the tool to work further up the tree without any problems.
Make sure the tool has a locking mechanism to keep the telescopic pole in place. You don't want to run the risk of the tool collapsing or falling off while you use it. A barbell tree trimmer is one of the tools to choose if you need a tool to cut tall tree branches while keeping your feet on the ground. With a pole tree trimmer, you can be sure that pruning taller branches will not put you in a dangerous situation.
This is also a commercial tree trimming equipment as you can use it to cut, trim and cut thick branches without difficulty. A chainsaw is fast and portable, which means it will cut those branches quickly without getting tired from the handling of the machine. Loppers fall under trees, tools and pruning equipment, as they make it easier to cut smaller branches. The loppers come with two handles and usually work like scissors, only they have very sharp blades to cut branches easily.
You will need to operate the tool while holding the two handles to cut the tree branches. Pruning should be done regularly, especially for large trees. Usually, mature trees should be pruned every 3 to 5 years. Younger trees should be pruned every 2 or 3 years.
Evergreen and fruit trees do not require regular pruning, but it should be done when branches become a safety hazard. Pruning involves the use of sharp tools and electric trimmers with blades. You could be injured by sharp blades and be vulnerable to electrical hazards. If you are pruning for the first time or using power tools, read the manual first and check the safety procedures.
I'm Donna Emery from Glover Nursery in West Jordan, Utah. What is the best tool for cutting tree branches? Usually, it is the size of the branch that determines which tool you are going to choose. I use these small scissors mainly for very small flowers and shrubs. I wouldn't be cutting too many branches, heavy branches, with that.
I like this clipper because of its ergonomic design. You have less pressure on your wrist and thumb. And I can cut up to an inch branch of live wood with this tool. If it's a dead branch, I could choose something a little bigger.
The clippers that I like are this one, which is anvil style and has the blade that sits in a soft metal channel. This is a bypass lopper that actually gives you a better cut, a cleaner cut. But it takes more strength in the upper body to make that cut. I never used anvil clippers because I think the cut is better on a bypass, but now that I'm not as strong as I used to be, I look for this guy a little more often.
This pruning saw is a really good tool for cutting small branches, up to 2 inches. It's very fast and very sharp and it's easy to put in my back pocket so I don't have to carry anything heavy. If it's bigger than 2 inches or if the branches are dead, I take my lightweight electric chainsaw. Again, I use an electric one because it's easier for me to pack than a heavy gasoline chainsaw.
If I had to cut large branches, larger than 4 inches or something like that, I would probably go for the one that runs on gasoline, but for most jobs this is big enough for me. I'm Donna Emery from Glover Nursery. Cutting trees with this tool is very convenient and is one of the best manual tree cutting options you can consider. When you want to cut down a tree manually, having a reliable cutting axe around you will make a big difference.
Ideally, you should only use cordless cutting tools if you have a small tree with thin branches and you only need to cut branches from time to time. It is similar to a pruner, but the handles are adjustable, allowing you to cut tree branches about 5 cm thick in high places. A combination pruner is the best option if you can't decide if you want a tree trimmer or a pole saw. Trees with dead, dying, sick, or infested branches pose a safety hazard: they could fall and cause property damage and injury to anyone unlucky enough to be around them.
Safety should be your top concern, so it's important that you use only the right tools to cut trees and follow safety recommendations. Trimmers, pole tree clippers and pole saws are ideal for cutting branches less than 2 inches (5.08 cm) thick. Essentially a grooming technique for your trees and shrubs, pruning prolongs the life of your plants, allowing you to enjoy them longer. Regardless of their size, pruning shears are strong as they can handle hard branches of small trees.
However, you'll have to cut tree branches off a ladder because you can't use it with your feet on the ground. The EcoGardener telescopic pruner is lightweight, durable and comfortable to use, allowing you to easily prune trees at a great height. If you need it to be among your favorite tools for cutting tree branches, then invest in one that has a longer lasting battery. Keep the right garden tools handy and never use them beyond what they are capable of handling.
Keeping trees pruned regularly improves the aesthetics of your outdoor space while improving the health of plants around them. . .
